Dear customers, the BeadShop store in Zásada and GlassShop in Desna will be closed from 5th to 6th of July and closed during the holidays from July 16th to July 29th, 2018. Thank you for your understanding.
Toggle Bar

Spring Bracelet

Spring Bracelet

Bracelet made from PRECIOSA Ripple™ pressed beads

The metallic decoration, which is enhanced in the combination with gold rocailles, flashes on the rippled surface of the PRECIOSA Ripple™ pressed beads. The interesting patterns and the colorful reflections will render your accessory unmissable. 

You can follow this simple tutorial to create an elegant bracelet from PRECIOSA Ripple™ pressed beads. The glossy version of the dual-color vacuum decoration known as California goes well with gold rocailles and together they create a luxurious piece of jewelry.

Thanks to the wide range of beads and seed beads from the PRECIOSA Traditional Czech Beads brand, you can create your own combination of colors and surface finishes and in doing so harmonize your accessories with your wardrobe and with any number of occasions. 

PRECIOSA ORNELA wishes you much inspiration and enjoyment from beadworking with beads and seed beads from the PRECIOSA Traditional Czech Beads brand.


icon pdf downloadSpring Bracelet

Materials and tools:

PRECIOSA Rocailles (R11)
331 19 001; 11/0; 59115 (ca 1 g)

PRECIOSA Rocailles (R8)
331 19 001; 8/0; 59142 (ca 1 g)

jarni naramek 10 jarni naramek 09
PRECIOSA Rocailles (R6)
331 19 001; 6/0; 59142 (ca 15 g)
PRECIOSA Ripple™ (Rip)
111 01 351; 12 mm; 00030/98549 (64x)
jarni naramek 12 jarni naramek 11

a 0.25 mm nylon line (ca 1.5 m); 2x connecting rings (gold); fastening (gold); scissors; needle nose pliers; flat nose pliers; snipping pliers


Procedure:

The bracelet is created using the so-called "four-bead" technique“.

Step 1:
String R6, Rip, R6, Rip, R6, Rip and 1xR6 onto a line which is about 1.5 m long.
Move the stringing to the middle of the line. String R6, 1x Rip and R6 onto one end of the line and thread the second end through them in the opposite direction.

Step 2: 

String 1x R6, 1x Rip and 1x R6 onto each end of the line. String another trio of 1x R6, 1x Rip and 1x R6 onto one of the ends and thread the second end through them in the opposite direction. Repeat this step one more time.

jarni naramek nakres 01 jarni naramek nakres 02

Step 3:

Repeat the second step until the bracelet reaches the required length.

Step 4:

String 5x R11 onto each of the ends. String 1xR8 onto one of the ends and thread the second end through it in the opposite direction.

jarni naramek nakres 03
jarni naramek 03
jarni naramek 04

Step 5:

String 2x R11 onto each end. Then string a further 2x R11 onto one end and thread the second end through them in the opposite direction. Thread both ends of the line back through a few rocailles and tie a firm knot which you should then dot with superglue so that it does not later come undone.

Step 6:

Connect the fastening with the connecting ring or sew it on using an R11. Attach the second part of the fastening in a similar way.

jarni naramek 05 jarni naramek 06

Designer: Aleksandra Lysenko