111 01 362; 5 mm; any shade
A 7 cm eye pin; 6 mm and 8 mm rings; a fastening ring or large carabiner
A 0.20 mm nylon line; scissors; pliers with conical points
Thread about 30 cm of line with 11x Th. Thread the line through it one more time. Tie off three knots. Cut off the line about 2 mm from the knot. Do not thread the end of the line into the Th.
String all seven shades of the Th like this.
First string 1x R, 1x Ri and 1x F onto an eye pin. Then string the yellow Th. Press the F into the centre of the Th.
Continue by repeating the procedure, i.e. 1x Ri, 1x F and the next Th shade. At the end, string 1x Ri.
Grasp the end of the pin between the points of the pliers. Twist it around the point of the pliers. You can even create a double loop depending on the size of the pin.
String a 6mm ring onto the loops on the eye pin. Connect 2x 8mm rings to the 6mm ring. Then string a fastening ring through them or you can connect a carabiner.