Dark Aquamarine

Step 1

The sewn part

If you want to sew all the parts using one line, cut off 1.5 m. When sewing 1 part, prepare 40 cm. String the line into the eye of the needle. You will need 7 parts for the necklace.

Step 3

Thread the line through 1x R6 next to the knot. String 5x R10. Move them up to the R6. Thread the line through them one more time. Thread the line through the R10. thread it through the 1^st R10 again. Adjust the loop of R10. Thread the line through 2x adjacent R6.

Step 5

Linking

The longest central pendant

Pass the pin through the T. 8 – 10 mm of free wire should protrude from it. Grasp the end of the wire between the ends of the points of the round-nosed pliers. Twist the wire around the points of the pliers. Bend the wire to the edge of the hole before closing. String the eye of the eye pin onto the wire. Close the eye using the points of the round-nosed pliers. You can also use flat pliers for this.

Step 7

Slightly open the eye on the newly linked eye pin. Insert it between the R10 from the second side of the sewn part. Close the eye. String 1x P onto the wire. Create an eye. String the eye of a new eye pin before totally closing the wire.

Step 9

String 1x P onto an eye pin. Create an eye. Twist the eye horizontally with the base.

Step 11

The next 2 pendants from the centra one. Repeat Steps 5 – 7. Close the eye and twist it horizontal with the base.

Step 13

Assembly

Cut off 50 cm of chain. Find the central link. Hang the central pendant in it using a 4 mm ring. Hang the second longest pendants on the second links from the centre. Hang the third longest pendants on the third links from the centre of the chain. hang the outer pendants on the fourth links from the centre of the chain using 5 mm rings. Adjust the length of the chain as you wish. In the example, it is 20 cm from the centre of the chain. Attach the counter-ring to one end of the chain using a 4 mm ring. Attach the carabiner to the other outer link.