Allow yourself to be carried away by the color range and the combination of decorations offered by PRECIOSA fire polished beads. This simple tutorial will enable you to produce your own original bracelet in an enormous scale of color shades.
PRECIOSA ORNELA presents a new vacuum treatment which can be used 100 % during the application of a series of five new types of combined vacuum decorations known as Glittery. These metallic decorations in both a gloss and matt finish also take on a new dimension when applied to PRECIOSA fire polished beads.
Designer: Michal Papež
PRECIOSA Fire Polished Beads (FPB4)
151 19 001; 4 mm; 00030/98555; 160x
PRECIOSA Fire Polished Beads (FPB6)
151 19 001; 6 mm; 00030/98855; 81x
PRECIOSA Rocailles (R8)
331 19 001; 8/0; 20701; 101x
a 0.25 mm nylon line; a thin needle; scissors; flat nose pliers (flattening the end of the line before stringing)
String the bracelet on the 0.25 mm line. Start by creating the first part of the fastening.
String 12x R8, sew them into a circle and tie it off. Hide the knot in the hole of a rocaille.
String a row of 4x R8, 1x FPB4, 1x FPB6 and 1x FPB4 on the line. Sew them into a circle and pull them up to the first part of the fastening.
String 1x R8, 1x FPB4, 1x FPB6 and 1x FPB4 onto the line.
Sew through three added rocailles, but leave out the first in the row.
String 1x R8, 1x FPB4, 1x FPB6 and 1x FPB 4 on the line.
Sew through three added rocailles counted from the back (leave out the first two). Repeat step four another 77 times or as needed. Tighten every stringing well.
Complete the bracelet with the second end of the fastening. String 5x R8, 1x FPB6 and another 1x R8 at the end. Return the needle through the now strung row and tighten well.