Made for You

Last Updated: Friday, 01 February 2019 08:15

Difficulty: 2

Heart made of Fire Polished beads and rocailles

A handmade gift is always appreciated so much more.

Use the so-called square stitch to create a three-dimensional heart using beads and seed beads from the PRECIOSA Traditional Czech Beads™ which is guaranteed to be an excellent gift for every occasion.
Preciosa Ornela wishes you much enjoyment when making gifts for your loved ones.

Design by: Martina Jůnová

MATERIAL AND TOOLS

Materials and tools:

vyrobeno pro tebe ohnpvky
PRECIOSA Fire Polished Beads (FPB)
151 19 001; 4 mm; 00030/97475 (82x)

vyrobeno pro tebe rokajl
PRECIOSA Rocailles (R10)
331 19 001; 10/0; 18598 (11x)

vyrobeno pro tebe 01c
a thin stringing needle; a 0.20 mm line; scissors; flat nose pliers; a 7 mm ring; a mobile phone cord

PROCEDURE

Procedure

Step 1:
Use one of the so-called square stitch methods (fig. no. 1) to sew the outer band. Cut off ca 130 cm of line. String a total of 1x R10 and 47x FPB. Connect the band together by passing the needle through the first R10 once again. Straighten the entire band, tighten it and connect both ends with a double knot. Do not yet cut off the shorter end of the line (ca 7 cm).
valentyn img01a en
vyrobeno pro tebe 01d

Step 2:
String 3x FPB and thread the needle through the R10 once again and then through the nearest outer FPB (fig. no. 2).
valentyn img02a en vyrobeno pro tebe 02a

Step 3:
Also use the square stitch on the sides of the heart which you will gradually connect to the outer band. String 1x FPB, 1x R10 and 1x FPB and thread the needle through one FPB from the outer band according to the illustration. String 1x FPB, 1x R10 and 1x FPB and thread the needle through one FPB from the outer band. String 3x FPB and thread the needle through one FPB from the outer band. String 2x FPB and thread the needle through one FPB from the outer band, then proceed in the opposite sequence along the second half of the heart's circumference and add the remaining FPB and R10 according to the illustration (fig. no. 3). You will string a total of 18x FPB and 10x R10 in this step.
valentyn img03a en vyrobeno pro tebe 03a

Step 4:
Thread the needle through one of the trio of central FPB according to the illustration so that you can continue sewing the second side of the heart (fig. no. 4). In this step, you will connect the outer R10 and the FPB from the outer band and the outer FPB and R10 strung in Step 3. Always string 1x FPB and thread the needle through the nearest FPB or R10 (fig. no. 4). You will string a total of 14x FPB in this step. Thread the needle and the line through the nearest FPB so that you can tie both ends of the line and sew them in.
valentyn img04a en vyrobeno pro tebe 04a

Step 5:
Thread the 7 mm ring through the upper second of the sewn heart. As such the heart can be used as a pendant or a pair of hearts can be used to make a distinctive pair of earrings.
vyrobeno pro tebe 05a vyrobeno pro tebe 06b vyrobeno pro tebe 14a